[Review]PCCOOLER HP-1204S-X CPU cooler
Page 1: Introduction
Page 2: A closer look: fin
Page 3: A closer look: heatpipe
Page 4: A closer look: mounting bracket, fan & Installation
Page 5: Testbed
Page 6: Test result
Page 7: Final thought
·Mounting bracket
The worst part of HP-1204S is the mounting bracket. The main issue is bracket’s pressure is too small, after installed it still can be moved!
Of course this weak point is fixed in HP-1204S-X.During our installation we found the mounting bracket is strengthened, putting enough pressure down to hold the cooler.
Using screw to fix the bracket on the cooler.
·Fan
Fan of HP-1204S-X(left) and HP-1204S(right)
The fan looks like the one of HP-1204S, also Hydraumatic Bearing, the RPM is 1200-2200, air input is about 53.5-78.5，And the noise level is about 15-25dBA.
◆ Installation
All the accessories.
Except the cooler itself, it also have LGA775 supporter, the 120mm fan, mounting bracket, RPM adjuster and some thermal compound.
The installation is quiet easy, first plug in the supporter and fix it. Then you can install the cooler on the supporter easily.
The design is not perfect, it stuck the CPU!
April 2nd, 2011 at 6:54 am
Many thanks for being my own tutor on this area. My spouse and i enjoyed your article very much and most of all favored the way in which you handled the aspect I thought to be controversial. You are always very kind towards readers really like me and aid me in my existence. Thank you.