AMD Bulldozer FX-8130P Performance Unearthed

Last month OBRovsky Blogspot let out several pictures of AMD "Bulldozer" engineering sample with some specs revealed.While lately DonanimHaber also claimed that they also got the processor.

The engineering sample is based on 32nm manufacturing process,and the model number is FX-8130P,it features 8-core design,codenamed Zambezi.In addition,it clocks at 3.2GHz,employs 8MB L3 cache,4*2MB L2 cache.

According to the display of CPU-Z,the FX-8130P has TDP of 186W and core voltage of 1.404V.

In addition,DonanimHaber also conducted a series of tests towards the engineering sample,including Super-PI,3DMark 11,PCMark 7,AIDA64,etc.The test results are shown as follows:

Super-PI 1M 19.500s

Super-PI 1M 20.191s with Phenom II X6 1090T@3.2GHz
As we can see the above test result,it takes 20.191s for Phenom II X6 1090T@3.2GHz,which is0.691s slower than that of Bulldozer.

Scoring 3045 with PCMark 7 test

Scoring P6265 with 3DMark 11 test when matched with GeForce GTX 580

Cache and memory test result of AIDA 64

Fritz Chess Benchmark result

x264 test result

CINEBENCH Release 10 test result

July 12th, 2011 at 10:43 pm
lol my 8800 gts uses less current than that
May 5th, 2012 at 10:58 am
Important submit! I actually has not been tuned in to it. It truly is stimulating to find out considering I am which means that discouraged once consultants position not any reckoned inside their get the job done. Question a talented that you are aware actually talking about. I’ll try to most certainly pay a visit to repeatedly!
November 29th, 2012 at 3:41 am
I was looking through some of your blog posts on this internet site and I believe this internet site is very instructive! Continue putting up.
December 12th, 2012 at 8:21 pm
Good page. futuresnow down 1806 merters. If the initiating host responds with a TCP packet containing the cookie +1 in the TCP ACK field, JUNOS software with enhanced services extracts the cookie, subtracts 1 from the value, and recomputes the cookie to validate that it is a legitimate ACK. If it is legitimate, JUNOS software with enhanced services starts the TCP proxy process by setting up a session and sending a SYN to the server containing the source information from the original SYN. When JUNOS software with enhanced services receives a SYN/ACK from the server, it sends ACKs to the server and to the initiation host. At this point the connection is established and the host and server are able to communicate directly.
December 21st, 2012 at 12:36 am
An attention-grabbing dialogue is value comment.
I believe that you should write more on this matter, it won’t be a taboo subject
conversely in most cases individuals have been not sufficient to
speak on such topics. To that the next. Cheers